Emitter 1 Basic Rc

Emitter 1 Basic Rc

I 32

I 32

Emitter 1 Basic Rc + HV80 Elkos

Emitter 1 Basic Rc + HV80 Elkos

Emitter 1 Basic Rc

10.699,00 €
The Emitter I is very elaborately built for its price range and the ideal amplifier for a high-end high-end system with very sophisticated, impedance-critical speakers.
With the sum of its special technical solutions, the Emitter 1 is a very favorable pioneer for high-class high-end music in your home.

Orders only for inputs can be made after communication with our website.

Σε απόθεμα
Κωδ.
PW-ASR-E1B
The Emitter I is very elaborately built for its price range and the ideal amplifier for a high-end high-end system with very sophisticated, impedance-critical speakers.
With the sum of its special technical solutions, the Emitter 1 is a very favorable pioneer for high-class high-end music in your home.


Dual-channel transistor integrated amplifier in acrylic housing, with input selector and level control.
2x 250 watts / 4 ohms - 2x 500 VA transformers.
Frequency response from 1 to 100,000 Hz with +/- 1dB, 20-20,000 Hz +/- 0.2 d
External voltage difference at the high-level input:> 88 dB · Rise time: <1 μS
Distortion factor <0.001% · Damping factor: greater than 600
Power consumption in standby mode: 0.6 VA, energy 50 VA, full load 120 VA
 
  • Class A / B technology with 12 special audio MOSFETs with high pulse strength.
  • Mounting rails of the solid brass end transistors for low resonances.
  • Volume adjustment with relay level switch in 1dB increments with balance and level compensation.
  • 25 mm LED display optionally in yellow or blue for function display, multiple adjustable.
  • 5 relay inputs with high level inputs plus 1 direct input, 1 tape out.
  • Adjustable input impedance 22k to 470 ohms for the cynch inputs.
  • Gold plated brass cynch sockets with teflon insulation.
  • Massive silver wires in the speaker signal path.
  • Large 60 amp terminals for cable lugs and 4mm banana plugs.
  • Protection circuits against overload, overload, short circuit, overheating and DC voltage.
  • Board with high material thickness (2.5mm) and particularly strong copper coating , components in mirror-symmetrical arrangement.
  • Outsourced power supply with 3 PM mains transformers and energy saving circuit.
  • Separate rectification for each of the 8 voltages with 32 Schottky diodes.
  • Sieve Capacity - HV filter capacitors with a total of 404,440 uF screening in 80 V.
  • Particularly stable power supply housing made of high-quality, thick-walled sheet steel.
  • Low-loss Neozed high-load fuse in the power supply.
  • Robust industrial connector from Harting for the connection to the amplifier part.
  • Double shielded connection cable to the amplifier part 2m long, on request also other lengths.
  • Power cable ASR Magic Cord 150 cm with low-loss 21A mains plug connection on the power supply, other lengths on customer request.
  • High-quality ASR Design remote control made of Corian (artificial stone) with stainless steel keys for all functions.
 
Dimensions and weight - amplifier
Width x depth x height:
42 x 42 x 18 cm - 19 kg.
 
Dimensions and weight - power supply
Width x depth x height - with plug in (brackets).
46 x 32 (42) x 16 cm - 32 kg
Total weight emitter I: 51 kg.
Χαρακτηριστικά
Κατασκευαστής ASR
Γράψτε τη Δική σας Αξιολόγηση
Αξιολογείτε:Emitter 1 Basic Rc

Προϊόντα από τον ίδιο κατασκευαστή