100 Phono

100 Phono



TP-6.5  Reference Phono

TP-6.5 Reference Phono

100 Phono

15.499,00 €

The 100 Phono Preamp is probably the world’s most comprehensive Phono
Preamp available. A key feature never achieved before is the ability to professionally digitalize analogue records.

Σε απόθεμα

The 100 Phono Preamp is probably the world’s most comprehensive Phono
Preamp available. A key feature never achieved before is the ability to professionally digitalize analogue records.

Burmester’s new 100 Phono Preamp is a highlight for all analogue-fans. The
100 is a reference to the successful 838 Phono Preamp from the 80’s. The final
result is a return to the roots of Burmester’s story of success, combined with
state of the art technology from the 21st century.

The 100 Phono Preamp was designed to provide record-fans with an ultimate
sound quality and a digital preservation of their tonal treasures. The 100 Phono
Preamp aligns carefully selected building parts, circuit technology and precise
engineering with faultless analogue sound. It represents the perfect intersection between the processing of finest analogue signals and practice-oriented
technology. With this device, it is possible to transmit your analogue record
collection in the highest-possible resolution to a server, a hard drive or directly to a CD recorder. The Signal-To-Noise ratio, responsible for acoustic noise,
humming, or distortion, is at the highest possible level. All measurements of
the phono preamp attain the absolute minimum that can be realized in theory
and practice. Thus, in all probability they represent the state of the art at present and in the long term.

Technical characteristics of the 100 Phono Preamp
Inputs: Fully equipped, the 100 Phono Preamp offers two balanced phono inputs (XLR
3pol. female), which can be configured as MM or MC versions. Thus, it supports the connection of record players with two different cartridges or the connection of two record
players, each having a different cartridge (MM/MC). The 100 Phono Preamp automatically
recognizes the MM or MC module, and thus has a very simple operation. In addition to that,
all settings (impedance, gain, subsonic, output 0 dB/+6 dB, Auto Adjust) are automatically
stored and are available when changing inputs.

XLR-Cinch-Adapters: Record players are ideal balanced sources. Therefore, in order to
achieve the best sound quality, tone arm leads should always be used with XLR-plugs. The
plugs can be ordered from Burmester. If your tone arm cable does not have XLR plugs, you
may use the provided adapters.

Input resistance/input capacitance: The input resistance of the MC version (33 , 75
, 220 , 390 , 1 k, 47 k) can be adjusted. Thus, impedance can be adjusted to any cartridge.
This certainly also applies to the adjustability of the input capacity in the MM version (68 pF,
120 pF, 180 pF, 220 pF, 300 pF, 400 pF – input resistance fixed at 47 k). The input impedances are changed via relay circuits. This results in a signal path which is as short as possible.
Interfering signals can therefore be reduced to the absolute minimum. The input sensitivity
can be selected in six steps for every module for an ideal level and volume adjustment.

Subsonic filter: In order to achieve best sound results even for old or wavy records, a
connectible subsonic filter prevents low-frequency deflections of the woofers.

World innovation: AUTO ADJUST: An exceptional highlight of the new 100 Phono
Preamp is its AUTO ADJUST function. With a simple touch of a button, you will receive an
automatic adjustment of the cartridges’ left and right channel, up to a precision of 0,2 dB
(2 %) and to a channel imbalance of 6 dB.

Outputs: The output level can be set to fix or volume variable. In combination with an
additionally adjustable output amplification of +6 dB, it is possible to connect the phono
preamp directly to power amps or active loudspeakers without a separate preamplifier. In
that case, the volume can only be controlled via remote control. Phase reversal: The balanced analogue output as well as the unbalanced analogue output are suited for phase
reversal. Therefore, all different kinds of amplifiers can be connected. The analogue output
stages are perfectly suitable for low-resistance inputs, due to the high driver capability of
their X-Amp2 modules.

DC-coupling: The DC-coupled signal path without distorting capacitors results in a very
precise reproduction of the low frequencies, because there is no phase shift in the audible

A/D converter: Due to the 100 Phono Preamp’s optional A/D conversion module (ADC)
with USB and S/P-DIF outputs, the analogue signal from the record can be digitally recorded. This means, your record collection can be archived on CDs or your music server.
Before the signal passes the A/D converter, it passes the Burmester X-Amp2 stages. As a
result, the signal receives the Burmester-typical sound characteristics even before conversion. The sampling rate for the A/D conversion can be selected between 48 kHz/24 bit, 96
kHz/24 bit, 192 kHz/24 bit for a sound adjustment according to personal preferences and
for obtaining the highest possible sound quality.

VU-Meter: The modulation for the right, the left or the mono-sum of both channels is indicated by the VU-meter. Therefore, with the according GAIN-setting, you can achieve the
highest-possible resolution of the A/D converter. Furthermore, the level indicator shows
imbalances between right and left channel instantly. At the same time, an inertia less LED
(Overload) indicates over modulating of the A/D converter. The appearance can be configured individually or adjusted to other components with the illumination of the VU-meter
and the dimmable LEDs.

Burmester goes Green: The 100 Phono Preamp has an internal analogue power supply. Due to its very low power consumption in Standby mode (<1 W), it fulfils the highest
environmental power requirements.

DC IN/OUT: Other units can be switched on by remote control due to the Master/Slave
function via DC IN/OUT.

BurLink: The optional Burmester Link module allows the operation of control systems like
AMX™ und CRESTRON™ via RS232 and USB.

Carbon fibre feet: The 100 Phono Preamp is equipped with vibration-isolating feet
with carbon fibre clips for an ideal resonance decoupling.

Remote Control: The following functions can be controlled via remote: Input, Load,
Gain, Subsonic, High/Low-Output, ADC, DIM, Volume, VU-Meter.

Professional Use: With regard to measurements, the 100 Phono Preamp meets the
highest possible standards. Thus, it is even suited for professional use. Whether you would
like to use it for broadcasting studios, recording studios or as a tool for archiving record
collections, the 100 Phono Preamp meets highest demands.

· Up to two balanced phono inputs (XLR 3pol female), MC or MM version available
(specify by order).
· Automatic recognition of the modules (MC or MM) and visualization at the front panel.
· Independent settings for each module which are selectable and automatically saved
(impedance, gain, subsonic, output 0 dB/+6 dB, auto adjust on/off, etc…)
· Input impedance for MC module selectable (33 , 75 , 220 , 390 , 1 k, 47 k) thus optimal
impedance adjustment possible.
· Input capacitance for MM module selectable (68 pF, 120 pF, 180 pF, 220 pF, 300 pF and
400 pF) thus optimal capacitance adjustment possible.
· The input impedances are switched by means of high performance audio relays, thus the
shortest possible audio path is achieved.
· The input gain can be selected which assures the best possible volume adjustment of
each and every Phono cartridge:
o MM: 37 dB, 40 dB, 43 dB, 46 dB, 49 dB, 52 dB,
o MC: 57 dB, 60 dB, 63 dB, 66 dB, 69 dB, 72 dB.
· Selectable subsonic filter to reduce large woofer movement due to wavy vinyl records.
· Automatic level adjustment of left and right channel (AUTO ADJUST) to compensate
Phono cartridge tolerances up to 6dB.
· Optional selection between fixed and variable volume output
· One balanced analogue stereo output, XLR 3pol male
· One unbalanced analogue stereo output, RCA
· DC coupled signal path assures the best sound reproduction down to the lowest
frequencies without any phase shift in the audible frequency range.
· X-AMP2 output modules with high driving capability feeds even low impedance
· Output voltage can be boosted by 6 dB for devices with a low input sensitivity.
· Output phase may be turned by 180° using a sliding switch on the back panel.
· Optional A/D converter-module with USB and S/P-DIF
· Two digital outputs, S/P-DIF (RCA) and optical (TOSLINK)
· Sampling frequency of the ADC is selectable between
48kHz/24bit, 96kHz/24bit or 192kHz/24bit
· Load display of the ADC with analogue audio level meter with dimmable illumination
· The meter can either display the left channel only, or the right channel only, or the mono
sum of both channels.
· Illumination of the meter selectable
· In addition to the analogue level meter a fast responding overflow LED for short peak
overflow indication is provided.
· The internal power supply features very low standby power consumption (< 1 W).
· remote power up of other devices possible by means of the DC IN/OUT connection.
· Optional BURLINK module for external control via RS232 or USB
· Carbon fibre feet reduce micro phonic effects.
· Burmester remote control included

Weight app. 10 KG 
Width x Height x Depth  482 mm x 95mm x 345 mm (19" x 3.7" x 13.6")
Input impedame MC 33 Ω, 75 Ω, 220 Ω, 390 Ω, 1 kΩ, 47 kΩ
Input capacity MM 68 pF, 120 pF, 180 pF,  220 pF, 300 pF, 400 pF
Inputs 2 x balanced Modules (MM or MC) (fully equipped)
Outputs analogue 1 x balanced, 1 x unbalancer
Outputs digital  1 x RCA, 1 x Toslink, 1 x USB
SNR MC/MM MM :-84 dB (bBA=-88 dB)
MC :-74 dB (dBA=-79 dB
Input amplification MM :37dB, 40dB, 43dB, 46dB, 49dB, 52dB
MC :57dB, 60dB, 63dB, 66dB, 69dB, 72dB
Max.input voltage MM :78 mV
MC :8.5 mV
Κατασκευαστής Burmester
Γράψτε τη Δική σας Αξιολόγηση
Αξιολογείτε:100 Phono