Emitter 2 Basic Rc + HV100 Elkos

Emitter 2 Basic Rc + HV100 Elkos

Emitter 2 Basic RC

Emitter 2 Basic RC

Emitter 2 Exclusive Accu Ready Rc

Emitter 2 Exclusive Accu Ready Rc

Emitter 2 Basic Rc + HV100 Elkos

19.999,00 €
The Emitters II are the right high-end amplifiers for uncompromising audiophiles who feel the musicians want to get into the living room! Without even batting an eyelash, the Emitter II drive the most demanding speakers such as large area floodlights - and consuming built dynamic transducers to high tonal performance.
Εξαντλημένο
Κωδ.
PW-ASR-E2BHV
The Emitters II are the right high-end amplifiers for uncompromising audiophiles who feel the musicians want to get into the living room!
 
Without even batting an eyelash, the Emitter II drive the most demanding speakers such as large area floodlights - and consuming built dynamic transducers to high tonal performance.
 
With an Emitter II, music unfolds in your home at its full dynamic range.
 
From the breath, over the slightest rustle on the stage, to the power of the full orchestra, the Emitter II plays all pitches neutral, powerful and unadulterated in the listening room. Especially at peak levels in concert volume, and sometimes even beyond, the playback and the room image remains absolutely stable.
 
Due to the special design without preamplifier with controlled amplification, the mitter II sounds even at very low levels starting and characterized precisely. This is also a result of the complex power supply with a large power supply per channel.
 
The Emitter II Exclusive is even more elaborate and is in a row with the most elaborate high-end amplifiers in the world.


Dual-channel transistor integrated amplifier in acrylic housing, with input selector and level control.
2x 450 watts / 4 ohms - 4x 500 VA transformers.
Frequency response from 1 to 100,000 Hz with +/- 1dB, 20-20,000 Hz +/- 0.2 dB
External voltage difference at the high-level input:> 86 dB · Rise time: <0.8 μS
Harmonic factor <0.001% · Damping factor: greater than 1000
Power consumption in standby mode: 0.6 VA, power 90 VA, full load 200 VA
  • Class A / B technology with 20 special audio MOSFETs with high pulse strength.
  • Mounting rails of the solid brass end transistors for low resonances.
  • Volume adjustment with relay level switch in 1dB increments with balance and level compensation.
  • 42 mm LED display optionally in white, yellow or blue for function display, multiple adjustable.
  • 5 relay inputs with high level inputs plus 1 direct input, 1 tape out.
  • Adjustable input impedance 22k to 470 ohms for the cynch inputs.
  • Gold plated brass cynch sockets with teflon insulation.
  • Massive silver wires in the speaker signal path.
  • Large 100 amp terminals for cable lugs and 4mm banana plugs.
  • Protection circuits against overload, overload, short circuit, overheating and DC voltage.
  • Boards with a high material thickness of 2.5 mm and a particularly thick copper surface, components in a mirror-symmetrical arrangement.
  • 2 Outsourced power supplies each with 3 PM mains transformers and energy-saving circuit.
  • Separate rectification for each of the 8 voltages with 64 Schottky diodes per power supply.
  • HV filter capacitors with a total of 757,520 uF screening in 100 V.
  • Particularly stable power supply housing made of high-quality, thick-walled sheet steel.
  • Low-loss Neozed high-voltage fuses in the power supply.
  • Robust industrial connector from Harting for the connection to the amplifier part.
  • Double shielded connection cable to the amplifier part 2m long, on request also other lengths.
  • Power cable ASR Magic Cord 150 cm with low-loss 21A mains plug connection on the power supply, other lengths on customer request.
  • High-quality ASR design remote control made of Corian (artificial stone) with stainless steel buttons for all functions.
2x 490 watts / 4 ohms - 4x 700 VA transformers.
 
  • HV filter capacitors with a total of 957,520 uF screening in 100 V.
  • Balanced input (XLR) with switchable input impedance.
  • Solid brass feet in chrome.
  • Elaborate built-in power supplies for even higher performance.
  • The 2x3 PM transformers are equipped with higher magnetizable core plate.
  • Separate rectification for each of the 8 voltages with 112 Schottky diodes.
 
Dimensions and weight - amplifier
Width x depth x height:
57 x 47 x 23 cm, 47 kg
 
Χαρακτηριστικά
Κατασκευαστής ASR
Γράψτε τη Δική σας Αξιολόγηση
Αξιολογείτε:Emitter 2 Basic Rc + HV100 Elkos

Προϊόντα από τον ίδιο κατασκευαστή